Commercial catering kit, sorted

Home / Blog / Induction vs Gas Hobs in Commercial Kitchens

Comparison

Induction vs Gas Hobs in Commercial Kitchens

By the Pass Kitchen team · Updated November 2026

ContentsAt a glanceSide-by-side comparisonHeat and controlRunning costs and kitchen comfortInstallation and rulesPans, cleaning and safetyOur verdictFAQs

For decades gas was the default in UK professional kitchens. Induction has since won over many chefs and operators, helped by cooler kitchens, easier cleaning and sites where gas is not available or not allowed. Rising interest in all electric kitchens and cleaner indoor air has added to the case for induction in new fit outs across the country. Gas still has loyal fans.

Neither is right for everyone. This guide compares induction and gas hobs on control, speed, cost, installation and the practical side of daily service, so you can decide what fits your kitchen. It also looks at kitchens that run both side by side, since that mix is now common and often gets the best from each heat source during a busy service.

At a glance

Induction hob

Duxtop Induction HobJudge 2000W Induction Hob with TimerAobosi 2800W Glass Induction Hob

Popular choices include the Duxtop Induction Hob (£69.89), Judge 2000W Induction Hob with Timer (£40.62) and Aobosi 2800W Glass Induction Hob (£99.99).

See the whole induction hobs range.

Side-by-side comparison

FeatureInduction hobGas stove
Heat sourceMagnetic field heats the panOpen flame
Kitchen temperatureCoolerHotter
PansMagnetic base neededAny pan
InstallationElectrician, suitable supplyGas Safe engineer, interlock
CleaningFlat glass wipes cleanPan supports and burners
Wok cookingNeeds a wok hobStrong flame suits woks
PortabilityCountertop units move easilyUsually fixed

Heat and control

Induction responds as quickly as gas when you change the setting, and it heats the pan directly, so water boils fast. Gas gives a visible flame and heats the sides of a pan, which some chefs prefer for tossing and wok cooking. Induction only works while the pan sits on the zone, so lifting a pan to toss it cuts the heat. Think about the dishes you cook most.

Running costs and kitchen comfort

Induction puts most of its energy into the pan, while gas loses a lot of heat into the room. That makes induction kitchens noticeably cooler, which can reduce extraction and air conditioning loads. Whether induction is cheaper overall depends on your electricity and gas tariffs. Compare your current prices rather than relying on general claims.

Installation and rules

Gas hobs need a Gas Safe engineer, a gas supply and a gas interlock with the extraction. Induction needs the right electrical supply, and several high powered zones may need a three phase connection. If your site has no gas, or the landlord does not want it, induction is usually the practical choice.

Pans, cleaning and safety

Induction requires pans with a magnetic base, so some of your kit may need replacing. Gas works with any pan. Induction's flat glass top wipes clean in seconds, while gas has pan supports and burners to clean. With no open flame, induction lowers some fire risks, but the pan and the glass beneath it still get very hot.

Our verdict

Choose induction for a cooler, cleaner kitchen, for sites without gas, for front of house cooking and if you want easy cleaning. Budget for new pans if needed.

Choose gas if your team relies on flame cooking, especially woks, and your site already has a suitable gas supply. Many kitchens now combine both, keeping gas for wok and flame work and using induction elsewhere.

Prefer to browse everything? Our full ranges of induction hobs and countertop gas stoves have more sizes, finishes and price points than we could fit here.

Frequently asked questions

Is induction as fast as gas?

Induction often boils water faster than gas because the energy goes straight into the pan. For searing and wok cooking, many chefs still prefer the flame of a gas burner. The best answer depends on your menu.

Will my existing pans work on induction?

Only if they have a magnetic base. Test with a magnet. Cast iron and many stainless steel pans work, while aluminium and copper usually do not. Pans with bonded magnetic bases are a good middle ground.

Does induction need extraction?

Cooking still creates steam, grease and smells, so extraction is normally still needed. Talk to your environmental health officer and installer about your specific kitchen. Induction may reduce the heat load, but it does not remove the need.

Can I mix induction and gas?

Yes. Many kitchens keep gas for wok and flame cooking and use induction for sauces, boiling and front of house stations. This lets each part of the menu use the heat source that suits it best, and spreads risk if one supply fails.